Product Description

pure sine wave inverter 40kw three phase off grid solar

inverter with UL1741/CSA

 

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it’s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won’t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. 

 

Technical Features:

• Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
• Intelligentized, modularized, simple structure design easy to maintenance.
• According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
• Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
• The output frequency can be setting via LCD panel, it’s very convenient for customer.
• The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
• The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
• Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
• Built-in low frequency isolation transformer, strong impact resistance, available with motors, pump, air conditioners and other high impact equipment. At the same time DC busbar and AC busbar are completely isolated to avoid interference.
• Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-400V or 400-800V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy.
• Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
• Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
• European CE (EMC, LVD) certificate, accredited by Australian CEC, ERAC energy network.

[Optional]

• RS485 remote monitoring;
• Can addAC bypass input complementary function;

 

Technical Parameter

Model	SDP-40KW		SDP-50KW
Isolation mode	Low Frequency Transformer
DC Input
Rated voltage (Vdc)	360Vdc	384Vdc	360Vdc		384Vdc
Rated current (A)	111A	104A	139A		130A
Input voltage range (Vdc)	324~480V	345~550V	324~480V		345~550V
AC Output
Rated power (Kw)	40KW		50KW
Rated voltage	220V±3%	380V±3%	380V±3%
Number of phases	1 phase 2 wire	3 phase 4 wire	3 phase 4 wire
Rated current (A)	182A	60A	76A
Rated output voltage range (V)	220/230/240/380/400/415/440/480VAC (optional)
Output frequency	50Hz or 60Hz ±0.05 (Can set)
Waveform	Pure sine wave
Waveform distortion rate  (THD)	Linear load≤2%
Dynamic Response time (Load 0←→100%)	5%, ≤50ms
Power Factor (PF)	0.99
Inverter Efficiency	>93%
Electrical insulation properties	2000Vac、1 Minute
Protection Function
Overload Ability	150%、10s
Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Display	LCD
Communication interface (optional)	RS485 (A、B)
Method of working	Working continuously
Cooling method	Fan-cooled
Short-circuit protection	No automatic recovery, need to restart the machine
Working Environment & Mechanical dimension
Degree of protection	IP20 (indoor)
Working Altitude（m）	≤2500m
Working temperature (℃)	-15～+50℃
Relative humidity (℃)	0~90%, No condensation
Noise ( 1 meter)	≤50dB
Unit size: (W x D x H)	650×750×1200mm
Reference weight(Kg)	315Kg			360Kg
Our company can adjust parameter configuration according to user’s requirement.

Price Terms︰ FOB Ningbo

Payment Terms︰ TT

Lead Time︰ 15 days

Standards Certificate︰ CE, ISO9001

Product Image