Product Description

SDP-30KW Pure Sine Wave Split phase inverter with

UL1741/CSA

 

Sandi pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply.

The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave.

 

Technical Features:

• Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
• Intelligentized, modularized, simple structure design easy to maintenance.
• Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
• The output frequency can be setting via LCD panel, it’s very convenient for customer.
• The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
• The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
• Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
• Low frequency transformer which ensure the DC busbar and AC busbar are completely isolated to avoid interference.
• Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-500V or 200-850V.
• High conversion efficiency, Max. Efficiency≥96%
• Adopts black pure aluminum radiator, which confirms the best radiating performance.
• Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
• Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-500V or 200-850V.
• European CE (EMC, LVD) certificate, accredited by Australian CEC, ERAC energy network.

[Optional]

• RS485 remote monitoring;
• Can addAC bypass complementary function;

 

Technical Data

Model		SDP-30KW		SDP-40KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	240V	300V	360V
	Rated current（A）	125A	100A	111A
AC Output	Rated output power	30KW		40KW
	Output waveform	Pure Sine Wave
	Rated Voltage	220V±3%	380VAC±3%	220V±3%		380VAC±3%
	Phases	Single phase	3 phase 4 wire	Single phase		3 phase 4 wire
	Rated current（A）	136A	45.5A (phase current)	182A		61A (phase current)
	Frequency	50Hz or 60Hz
	Rated output voltage range (V)	220/230/240/380/400/415VAC optional
	Power Factor（PF）	0.95
	Overload Ability	150%, 5 seconds
	Efficiency	>93%
	Waveform distortion rate (THD)	<3%（Linear load）
	Dynamic Response (0 to 100% load)	5%，≤50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	≤50dB
	Degree of protection	IP20（indoor）
	Working Altitude（m）	≤2000
	Working temperature	-25~+55℃
	relative humidity	0~90%，non-condensing
Mechanical dimension	Depth*Width*Height	650x750x1100mm
	Weight （Kg）	260Kg			350Kg

Price Terms︰ FOB Shanghai

Payment Terms︰ TT

Lead Time︰ 10 days

Standards Certificate︰ CE, ISO9001

Product Image