high efficiency off grid solar power inverter 50kw Hybrid Inverter charger
  • high efficiency off grid solar power inverter 50kw Hybrid Inverter charger
  • Outdoor inverter 50kw Waterproof Solar Inverter Manufacturer IP54 power Inverter
  • Pure Sine Wave Inverter 50kw Off Grid Inverter

high efficiency off grid solar power inverter 50kw Hybrid Inverter charger

Model No.︰

SDP-50KW

Brand Name︰

SANDI

Country of Origin︰

China

Unit Price︰

US $ 10500 / pc

Minimum Order︰

1 pc

Share on:

Product Description

SDP-50KW high efficiency off grid solar power inverter 50kw Hybrid Inverter charger

 

Sandi pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply.

The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave.

 

Technical Features:

  • Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
  • Intelligentized, modularized, simple structure design easy to maintenance.
  • Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
  • The output frequency can be setting via LCD panel, it’s very convenient for customer.
  • The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
  • The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
  • Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
  • Low frequency transformer which ensure the DC busbar and AC busbar are completely isolated to avoid interference.
  • Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-500V or 200-850V.
  • High conversion efficiency, Max. Efficiency≥96%
  • Adopts black pure aluminum radiator, which confirms the best radiating performance.
  • Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
  • Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-500V or 200-850V.
  • European CE (EMC, LVD) certificate, accredited by Australian CEC, ERAC energy network.

[Optional]

  • RS485 remote monitoring;
  • Can addAC bypass complementary function;

 

Technical Parameters (Normal model)

Model

SDP-40KW

SDP-50KW

Isolation mode

Low Frequency Transformer

DC Input

Rated voltage (Vdc)

360Vdc

384Vdc

360Vdc

384Vdc

Rated current (A)

111A

104A

139A

130A

Input voltage range (Vdc)

324~480V

345~550V

324~480V

345~550V

AC Output

Rated power (Kw)

40KW

50KW

Rated voltage

220V±3%

380V±3%

220V±3%

380V±3%

Number of phases

1 phase 2 wire

3 phase 4 wire

1 phase 2 wire

3 phase 4 wire

Rated current (A)

182A

60A

227A

76A

Rated output voltage range (V)

220/230/240/380/400/415/440/480VAC (optional)

Output frequency

50Hz or 60Hz ±0.05 (Can set)

Waveform

Pure sine wave

Waveform distortion rate (THD)

Linear load≤2%

Dynamic Response time (Load 0←→100%)

5%, ≤50ms

Power Factor (PF)

0.99

Inverter Efficiency

>93%

Electrical insulation properties

2000Vac1 Minute

Protection Function

Overload Ability

150%10s

Protection

Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.

Display

LCD+LED

Communication interface (optional)

RS485 (AB)

Method of working

Working continuously

Cooling method

Fan-cooled

Short-circuit protection

No automatic recovery, need to restart the machine

Working Environment & Mechanical dimension

Degree of protection

IP20 (indoor)

Working Altitudem

≤3000m

Working temperature ()

-20+50

Relative humidity ()

0~90%, No condensation

Noise ( 1 meter)

≤55dB

Unit size: (W x D x H)

750×650×1200mm

Reference weight(Kg)

320Kg

360Kg

Our company can adjust parameter configuration according to users requirement.

 

 



Price Terms︰ FOB Ningbo, Shanghai
Payment Terms︰ TT
Lead Time︰ 10 days
Standards Certificate︰ CE, ISO9001

Product Image

high efficiency off grid solar power inverter 50kw Hybrid Inverter chargerhigh efficiency off grid solar power inverter 50kw Hybrid Inverter charger

Outdoor inverter 50kw Waterproof Solar Inverter Manufacturer IP54 power InverterOutdoor inverter 50kw Waterproof Solar Inverter Manufacturer IP54 power Inverter

Pure Sine Wave Inverter 50kw Off Grid Inverter Pure Sine Wave Inverter 50kw Off Grid Inverter

ZHEJIANG SANDI ELECTRIC CO., LTD  

Email: zjsandi@sandi.cc / katrinayi87@yahoo.com               

Mobile / WhatsApp / WeChat: +86 13858880682                     Skype: katrina0682

Tel: +86-577-62793760                                                                          QQ: 1276317917

Address: Building 13-2 Botong Huigu, Economic Development Zone, Yueqing city, Zhejiang Province, China

Powered by DIYTrade.com