15KW Integrated solar Inverter/solar charge controller all in one
Our solar inverter with charge controller integrated is designed according to the characteristics and requirements of green new energy system. It is suitable for the requirements of high quality and stability of solar energy PV power system. The PV modules convert the solar energy to DC power and charging the batteries via charge controller, meanwhile the batteries supply DC power to off grid inverter convert DC power to AC power, finally the AC power will be supplied to AC loads, with the high utilization efficiency of solar power.
Technical Features:
1, Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
2, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
3, The output frequency can be set, this function is very convenient for customer.
4, The output voltage can be set between +20 % to -40 % of rated voltage. It’s a great convenience to users.
5, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly.
6, Pure sine wave output. with good transient response less than 50MS, little harmonic distortion, higher conversion efficiency and stable output voltage.
7, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
8, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.
Technical Data
|
Model
|
SPIC-15KW
|
|
DC Input
|
|
Rated Voltage（Vdc）
|
192V
|
|
Rated current（A）
|
80A
|
|
Input voltage range（Vdc）
|
172～275V
|
|
Solar Controller Input
|
|
Maximum. Input voltage of solar panels（Vdc）
|
352V
|
|
Maximum power of solar array
|
15.36KW
|
|
Input strings
|
2
|
|
Maximum charge current（A）
|
80A
|
|
AC Output
|
|
Output Rated power
|
15KW
|
|
Output Rated current（A）
|
22.7A (phase current)
|
|
Output voltage accuracy
|
400VAC±3%, 3 phase 4 wires
|
|
Output frequency accuracy
|
50HZ±0.05
|
|
Waveform distortion rate（THD）
|
≤3%（line load）
|
|
Dynamic response（load 0～100%）
|
3%，≤50ms
|
|
Power factor（PF）
|
0.9
|
|
Efficiency
|
≥93%
|
|
Electrical insulation properties
|
2500Vac，1minute
|
|
Protection
|
|
Overload capacity
|
150%，10s
|
|
Protection function
|
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
|
|
Running mode
|
Continuous running
|
|
Cooling method
|
Fan-cooled
|
|
Short circuit protection
|
Noautomatic recovery, restart machine
|
|
Work environment
|
|
Degree of protection
|
IP20 (indoor)
|
|
Using altitude（m）
|
≤2000
|
|
Working temperature（℃）
|
-10～+50
|
|
Storage Temperature（℃）
|
-25～+85
|
|
Noise（dB，1meter）
|
≤50
|
