SDP-80KW single phase off-grid inverter 220V solar dc to ac
inverter with CSA/UL certificate
Product Introduction
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it’s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won’t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
2, Intelligentized, modularized, simple structure design easy to maintenance.
3, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
5, The output frequency can be setting via LCD panel, it’s very convenient for customer.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
9, Built-in low frequency isolation transformer, strong impact resistance, available with motors, pump, air conditioners and other high impact equipment. At the same time DC busbar and AC busbar are completely isolated to avoid interference.
10, Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy.
11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
12, Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
13, European CE (EMC, LVD) and ISO9001 certificate
[Optional]
RS485 remote monitoring;
Can addAC bypass input complementary function;
Technical Parameter
Model
|
SDP-80KW
|
Isolation mode
|
Low Frequency Transformer
|
DC Input
|
Rated voltage (Vdc)
|
384Vdc
|
480Vdc
|
Rated current (A)
|
208A
|
167A
|
Input voltage range (Vdc)
|
345~550V
|
432~650V
|
AC Output
|
Rated power (Kw)
|
80KW
|
Rated voltage
|
220V±3%
|
380V±3%
|
Number of phases
|
Single phase
|
3 phase 4 wire
|
Rated current (A)
|
364A
|
121A
|
Rated output voltage range (V)
|
220/230/240/380/400/415/440/480VAC (optional)
|
Output frequency
|
50Hz or 60Hz ±0.05 (Can set)
|
Waveform
|
Pure sine wave
|
Waveform distortion rate (THD)
|
Linear load≤2%
|
Dynamic Response time (Load 0←→100%)
|
5%, ≤50ms
|
Power Factor (PF)
|
0.99
|
Inverter Efficiency
|
>93%
|
Electrical insulation properties
|
2000Vac、1 Minute
|
Protection Function
|
Overload Ability
|
150%、10s
|
Protection
|
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
|
Display
|
LCD+LED
|
Communication interface (optional)
|
RS485 (A、B)
|
Method of working
|
Working continuously
|
Cooling method
|
Fan-cooled
|
Short-circuit protection
|
No automatic recovery, need to restart the machine
|
Working Environment & Mechanical dimension
|
Degree of protection
|
IP20 (indoor)
|
Working Altitude(m)
|
≤3000m
|
Working temperature (℃)
|
-20~+50℃
|
Relative humidity (℃)
|
0~90%, No condensation
|
Noise ( 1 meter)
|
≤55dB
|
Unit size: (W x D x H)
|
850×800×1650mm
|
Reference weight(Kg)
|
580
|
640Kg
|
Our company can adjust parameter configuration according to user’s requirement.
|
|
|
|
|
WHY CHOOSE US ?
1, QC Control
SANDI company has passed ISO9001 international quality system certification. We established a complete quality system ranging from material source, process, assembling to testing. Most of our products have been certified to meet international safety standards, such as CE (LVD/EMC), SAA.
2, Best Partner
SANDI have co-operative partner throughout the world including USA, Europe, South America, South Africa, Middle Eastern, Qatar, Nigeria and so on .We offer wide range quality products either from our own standard range or customer-made to your specifications. SANDI is becoming the most growthful China Inverter supplier all over the world.
FAQ
Can we use this inverter with AC electricity?
Yes, SANDI off grid inverter can hybrid AC generator, solar, power grid.
If we use DC and AC electricity both, which one will be first?
SANDI off grid inverter is AC/DC priority adjustable.
What is the efficiency of SANDI power inverter?
SANDI off grid inverter has >94% power efficiency.
What kind of certification of this inverter you have?
We have many certification, CE (EMC, LVD) and ISO9001, SAA,etc
What is the warranty for the pure sine wave inverter?
For the inverter, we offer 2 years warranty.
1.How to choose suitable inverter?
If your load is resistive loads, such as: bulbs, you can choose a modified wave inverter. But if it is inductive loads and capacitive loads, we recommend using pure sine wave power inverter.
For example: fans, precision instruments, air conditioner, fridge, coffee machine, computer, and so on.
Modified wave can be started with some inductive loads, but effect for load using life, because capacitive loads and inductive loads need high quality power.
2.How do I choose the size of the inverter?
Different types of load demand for power are different. You can view the load power values to determine the size of the power inverter.
Notice:
Resistive load: you can choose the same power as the load.
Capacitive loads: according to the load, you can choose 2-5 times power.
Inductive loads: according to the load, you can choose 4-7 times power.