40kW DC Charging Power Module Charger 100-1000V AC/DC Converter Rectifier
Product Introduction：
SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module.
Unique function：
High efficiency over the full load range, full load efficiency greater than 95.5%
Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery
5-inch LCD touch screen, easy to operate
Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate
Main features：
Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc.
Three phase active power factor correction technology, reduces the harmonic interference to the grid
Dual DSP design, achieve the full digital control, less components means high reliability
Wide input voltage range, allows operation in most poor grid conditions
Soft start charging and soft shutdown minimize the impact on the battery.
Input, output have protective circuit breaker switch
Module adopts hot pluggable design, which is convenient for maintenance.
CAN/RS485 interface
Product Parameters (SD750E100A)
Model
SD750E100A
AC input
Input system
Three phases + PE
Voltage range
340Vac ~450Vac
Rated voltage
400Vac
Frequency range
50Hz/60Hz
Maximum current
<74A
ITHD (total harmonic distortion)
<5%
DC output
Voltage range
100-750Vdc ( can set)
MAX. Output current (A)
100A
Current range
1 ~ 100A (can set)
Steady voltage precision
<±0.5%
Steady current precision
≤±1% (rated range of 20% ~ 100% for output load)
Load regulation rate
≤±0.5%
Startup overshoot
≤±3%
Peak-to-peak value noise
≤1% (200~1000V, 0~20MHz)
Display
Indication Light
Green LED: normal operation,
Yellow LED: alarm, Red LED: failure
Display language
English
Display
5’ LCD touch screen
Power factor and THD
Power factor
≥0.90 Full-load output power of @20%~50%
≥0.98 Full-load output power of @50%~100%
≥0.99 Full-load output power, input nominal voltage and frequency of @100%
THD
≤5% Full-load output power of @50%~100%
Protection function
input overvoltage Protection
Over Under Voltage automatic shutdown and restart when voltage return normal
Output overvoltage protection
Over Under Voltage automatic shutdown and restart when voltage return normal
Over-temperature protection
Automatic shutdown. Automatic restart when the temperature return to normal
Short circuit protection
Automatic shutdown and lock, need power off to restart to unlock
Efficiency
Under Rated input voltage
≥95.2％
Application place
Indoor (IP20)
Environmental conditions
Operation temperature
-20°C ~ +75°C, derating from 55°C
Storage temperature
-40°C ~ +70°C
Relative humidity
≤95%RH, without condensation
Cooling mode
Forced fan cooling
Noise
≤60dB (1maway)
Altitude
2,000m
Communication
RS485 / CAN BUS
Insulation resistance
insulation resistance of DC and AC part to housing and the AC to the DC part shall be ≥ 10MΩ
Price Terms︰
FOB Ningbo
Payment Terms︰
TT
Lead Time︰
15 days
Standards Certificate︰
CE, ISO9001
Product Image
40kW DC Charging Power Module Charger 100-1000V AC/DC Converter Rectifier
